Contents: Removal ⇓ Installation ⇓
The heat generated by the engine is transferred by the coolant to the heater radiator located in the passenger compartment. The air flow supplied by the ventilation system passes through the radiator and is heated by the heat of the engine coolant flowing inside the radiator.
The body ventilation is provided by forming a through air flow. Fresh air enters the car through the air intake located in front of the windshield. The air flow goes out through the exhaust channels.
The amount of air flow is regulated by a fan.
Removal
1. Disconnect the cable from the negative terminal of the battery.
2. Drain the coolant.
3. Disconnect the air conditioner suction hose, liquid refrigerant pipe and remove the seal.
4. Disconnect 2 drive cables from the heater and one drive cable from the fan housing.
Heater: 1 - left part of the heater casing; 2 - right part of the heater casing; 3 - temperature control flap; 4 - air supply damper to ventilation grilles; 5 - air supply valve to the footwell area; 6 - air supply flap to the windows; 7 - temperature control flap drive lever; 8 - air supply flap drive lever for ventilation grilles; 9 - footwell air supply flap drive lever; 10 - air supply flap drive lever to the windows; 11 - Temperature control flap drive leash; 12 - air supply flap drive leash to ventilation grilles; 13 - air supply flap drive link to the windows; 14 - air distribution flap drive cam; 15 - heater radiator cap; 16 - heater radiator; 17 - clamp; 18 - screw; 19 - clamp; 20 - pin; 21 - spring washer; 22 - torsion spring; 23 - air intake; 24 - seal.
7. Remove ten bolts and remove the instrument panel beam.
Installation
Installation is carried out in the reverse order of removal.
Before connecting the temperature control and air flow distribution flap drive cables, install the pin.
