Removal
1. Disconnect the connectors from the absolute pressure sensors, idle air control valve and throttle position sensor.
2. Remove the air intake pipe connected to the throttle body.
3. Remove the accelerator cable.
4. Remove the crankcase ventilation hose and disconnect the vacuum hose from the brake booster.
5. Disconnect the coolant hoses from the throttle body.
6. Disconnect the connectors from the injectors.
7. Remove the fuel line with fuel injectors.
8. Remove the air chamber support.
9. Remove the intake manifold
Examination
Check the air chamber for defects or cracks.
Check the intake manifold for damage or cracking.
Check the air duct for damage or cracking of any part.
Installation
1. Install the fuel line with the fuel injectors attached to it.
Warning: Be careful not to drop the fuel injectors when installing the fuel line.
2. Make sure the insulators are properly inserted into the fuel line holes.