Attach the cable to the engine brackets and lift it up to take the load off the dampers.
1. Turn away bolts of fastening of the engine to dampers.
2. Remove the mounting bracket from the engine.
3. Turn away a bolt of fastening from a transmission.
4. Remove the plugs from the inside of the right mudguard and unscrew the remaining gearbox mounting bolts.
5. Remove the gearbox bracket.
6. Turn away the top and bottom bolts of a forward stopper.
7. Remove the front stem assembly.
8. Turn out a bolt from a back stopper.
9. Remove the rear stopper from the crosshead.