Headlights must be adjusted using special equipment and in accordance with the equipment manufacturer's instructions.
Rotate the adjustment wheels one by one to adjust the headlight beam. If special equipment is not available, adjust as follows.
1. Bring the pressure in the tires to the required one. Only the driver, tools and spare wheel should be in the vehicle.
2. Place the vehicle on a flat, level surface in front of a screen or wall.
3. On the screen, draw a vertical line through the center of each headlight and a horizontal line through the center of the headlights.
4. Turn on the headlights and, by turning the adjusting screws, adjust their position so that the brightest spot is located in accordance with the shaded area in the figure.