Spiral spring (Hyundai Getz 1)

The coil spring consists of two twisted coils. It is installed between the steering column and the steering wheel and allows the steering wheel to rotate while maintaining contact with the electrical circuit of the safety system.



The steering wheel must be properly installed on the steering column with the coil spring set to neutral position, otherwise a broken wire or other malfunction may occur.

1. If there are any defects, the spiral wire must be replaced.

2. Check the electrical connectors and yellow protective tube for damage and oxidation of the connector contacts.



[The basis of the material is information from the website www.hyundaibook.ru]