Bleeding the hydraulic brake drive system (Hyundai Getz 1)

1. Remove the cap from the expansion tank and fill it with brake fluid.

Caution! Brake fluid dissolves paint, plastic and wire insulation, so if the fluid accidentally gets on the car's paintwork or its components, wash them with plenty of water.

Note: When bleeding under pressure, do not press the brake pedal

3. Slowly press the brake pedal several times.

4. With the brake pedal depressed, use a wrench to loosen the bleeder screw and release air from the hydraulic system. Tighten the bleeder screw and release the brake pedal.