Examination
1. Park the vehicle on a level, level surface.
2. Turn away a stopper of a jellied opening and remove a lining. Check that the oil level in the gearbox housing is correct.
Add oil to the crankcase if necessary. After checking, install a new gasket and tighten the plug.
- Tightening torque: 30-35 Nm
Replacement
1. To drain the oil, unscrew the filler and drain plugs. The gearbox must be warm (be careful not to burn yourself with hot oil).
2. After draining the oil, install the gasket and tighten the drain plug.
- Tightening torque: 30-35 Nm
3. Fill with oil, install a new gasket and tighten the filler plug.
Note: pour oil slowly, in small portions with breaks of several minutes.
- Oil quality according to API: GL-4
- Oil Viscosity SAE: 75W-90
- The volume of the poured oil: 2.1 l
- Tightening torque: 30-35 Nm
4. After installing the filler plug, check the gearbox for oil leaks and damage.