Air filter assembly.
1 - intake air hose, 2 - air filter assembly, 3 - mass air flow sensor (engine 2.7 l), 4 - intake air duct, 5 - resonator, 6 - air filter cover, 7 - filter element, 8 - air filter housing.
Removal and installation
1. (Engine 2.1L) Disconnect the air flow sensor connector.
2. Disconnect the air inlet hose and air duct from the air filter.
Engines 2.0 l / 2.4 l. | Engine 2.7 l. |
3. Turn away three bolts of fastening of the case of the air filter.
4. Remove the air filter.
5. (2.7L engine) Remove the air flow sensor from the air intake hose.
6. Install the air filter assembly in the reverse order of removal.
Examination
1. Check the air inlet hose, air filter housing and cover for damage.
2. Check the intake duct for damage.
3. Check the air filter element.
Note: The operation of checking the air filter element is shown in the chapter "Maintenance and general inspection and adjustment procedures".