Contents: Turn signal switch ⇓ Switch operating mode when changing…⇓ Headlight switch ⇓ Automatic shutdown of lights in the…⇓ Outdoor lighting during daytime, for…⇓ Headlight high beam switch ⇓ Flashing headlights ⇓
Turn signal switch
When you move the combination switch down, the turn signals on the left side of the vehicle start to flash. When you move the combination switch up, the turn signals on the right side of the vehicle start to flash. After completing the turn, the switch will automatically move to the neutral position and at the same time, the turn signals will stop flashing. If the turn signal indicator light on the instrument panel flashes faster than usual, lights up but does not flash, or does not light at all, this indicates a malfunction in the turn signal circuits. Check for a blown fuse or bulbs, or contact your authorized HYUNDAI dealer for inspection.
Switch operating mode when changing rows
When changing lanes, move the lever up or down until the turn signals come on.
Once released, the lever automatically returns to the neutral position.
Headlight switch
Turn the drum on the end of the combination switch to turn on the headlights. The first position will turn on the parking lights, side lights, tail lights and instrument panel lights. The next position will turn on the headlights.
Automatic shutdown of lights in the parking lot
If you do not turn off the parking lights after stopping, they will automatically turn off if the driver's door is opened. To turn on the parking lights again, simply turn on the ignition.
Outdoor lighting during daytime, for Sweden, Finland and Iceland
Your Hyundai is equipped with daytime running lights for Sweden, Finland and Iceland. This light is used to improve visibility of oncoming traffic. This light on your vehicle is designed to operate when the engine is running and the headlight switch is in the "OFF" position. However, the daytime running lights for Sweden, Finland and Iceland will be turned off when the parking brake is applied.
Headlight high beam switch
To turn on the high beam headlights, press the switch forward (away from you). At the same time, the high beam indicator light on the instrument panel will light up. When you move the lever back towards you, the light switches from high to low beam,
Flashing headlights
Flashing of headlights is performed by slightly moving the switch lever towards you and releasing it. Flashing of headlights is possible even if the headlight switch is in the "OFF" position,