Pic. 3.43. Gearshift Components
Withdrawal
Remove the floor console assembly.
Remove cotter pins and clamps of cables of management of a check point from the party of the lever of a gear change.
Remove the shift lever assembly.
Turn away bolts and remove an intermediate bracket of cables of management of a check point on a partition of a motor compartment.
Remove the cotter pins and clamps of the gearbox control cables (from the gearbox side).
Pic. 3.44. Select and shift cables
Remove selector and shift cables (pic. 3.44).
Examination
Check the operation of the gear selector cable and that it is not damaged.
Check the operation of the shift cable and the absence of damage.
Check the anthers of the transmission control cables for damage.
Check each bushing for wear, chafing, seizing, difficult movement, or damage.
Check the spring for wear or damage.
Assembly
Install the shift lever assembly.
Install the selector cable and shift cable.