Rotate the brake light switch until the gap between the switch housing and the brake pedal lever reaches the nominal value. Then secure the switch with the lock nut.
- Gap "A": 0.5-1.0 mm
If the gap is not within specifications, adjust it.
2. Adjust the gap "A" between the brake light switch and the pedal travel limiter.
- a) Loosen the lock nut.
- b) Adjust the gap by rotating the brake light switch.
- c) Tighten the lock nut.
3. Check the free travel of the brake pedal.
- Free travel "B" of the brake pedal: 3-8 mm
4. Check the height of the brake pedal.
- a) Check the height of the pedal in the free position.
- Brake pedal height in free position: 176±0.3 mm
- b) Start the engine, press the pedal with a force of 500 N and check the height of the pedal when pressed.
- Brake pedal height when pressed at 500 N force: 75 mm or more
- c) Check the height of the pedal when fully depressed and without brake fluid.
- Brake pedal height when fully depressed and without brake fluid: 44 mm or more