Caution: When performing any work on the SRS system, follow the instructions in the "Operation and Maintenance Safety" section.
Removal and installation
1. Remove the seat belt lower plate cover and unscrew the seat belt lower plate mounting bolts.
- Tightening torque: 40-55 Nm
2. Remove the center pillar trim and unscrew the seat belt upper plate mounting bolts.
- Tightening torque: 40-55 Nm
3. Remove the front seat belt pretensioner.
4. Installation is carried out in the reverse order of removal.
[Information is copied from the website: hyundaibook.ru]