Specifications
Type - Single disc clutch with hydraulically actuated diaphragm
Diameter (external x internal) - 215 x 140 mm
Disc thickness - 8.3-8.9 mm
Height of the clutch pedal above the floor - 176-181 mm
Pedal free play (the amount of pedal free play backlash in the pedal mount) — 6-13 mm
Clutch pedal travel - 150 mm
Connection tightening torques, Nm
Mounting the clutch pedal to the bracket - 25-35
Bolt of fastening of a main cylinder of coupling — 10-15
Clutch line nut - 13-17
Bolt of fastening of the working cylinder of coupling — 20-27
Bolt of fastening of the union of the working cylinder of coupling — 15-20
Clutch cover assembly - 15-22
Self-locking nut of a pusher of a main cylinder of coupling — 10-15
Lubricants and fluids
Place of lubrication | Lubrication type |
The contact surface of the release bearing and the pivot pin of the fork | PRAY TA N2 |
Release bearing inner surface | PRAY TA N2 |
The inner surface of the working cylinder | Brake fluid: DOT-3 |
The inner surface of the splined part of the clutch disc | PRAY TA N2 |
Master cylinder inner surface and piston outer circumference | Brake fluid: DOT-3 |
Master cylinder tappet, pin and washer | Wheel bearing grease SAE J310, NLGI N2 |
Clutch pedal axle and bushings | Grease SAE J310, NLGI N1 |
The contact part of the fork and the pusher of the working cylinder | PRAY TA N2 |
Internal splined shaft | PRAY TA N2 |