- Height from top of pedal to floor "A" - 176 mm
If the pedal height is not as required, adjust it using the following recommendations.
1) Pull back the brake light switch to a position where it does not contact the pedal lever.
2) Turn the brake light switch until the distance between this switch and the pedal lever reaches the standard value, and then secure the switch with the lock nut.
- The standard distance between the pedal and the brake light switch "B" is 0.5-1.0 mm
2. Free travel of the brake pedal.
- Free travel of pedal "C" - 4-10 mm
3. Start the engine, press the brake pedal with a force of approximately 500 N and measure the distance between the pedal and the floor of the car body.
Distance from pedal to floor "D":
- when the pedal is pressed with a force of 500 N - 75 mm or more
- when the pedal is fully depressed without brake fluid in the system - 35 mm or more
 |
 |
 |
 |