Contents: Removal ⇓ Installation ⇓
Rear bumper.
1 - rear bumper, 2 - rear bumper molding, 3 - bolt, 4 - piston, 5 - bolt, 6 - nut
Removal
1. Loosen the nuts securing the rear combination lights, disconnect their connectors and remove the rear combination lights as an assembly.
The basis of the material is information from the website www.hyundaibook.ru
2. Disconnect the upper and lower fasteners of the rear bumper trim.
3. Unscrew the screws securing the rear bumper trim, located on the rear splash shield.
4. Remove the rear bumper cover assembly.
5. Unscrew the bolts securing the rear bumper reinforcement and remove it.
Installation
6. Installation is carried out in the reverse order of removal.