Contents: Removal ⇓ Installation ⇓
Removal
Fig. 8.39. Rear bumper cover mounting screws
Unscrew the screws of the rear bumper cover (Fig. 8.39).
After raising the vehicle, remove the screws holding the rear bumper cover and rear wheel arch liner.
Fig. 8.40. Removing the energy absorber
Remove the energy absorber (Fig. 8.40).
Fig. 8.41. Removing the rear bumper beam
Remove the rear bumper beam (Fig. 8.41).
Installation
Installation is carried out in the reverse order of removal.