Make sure the battery is fully charged.
Make sure that no abrasive materials enter the hatch sliding module.
Make sure that the rear of the glass panel does not interfere with the roof panel when opening the glass panel. If it does interfere, open the glass panel fully and move the stopper forward.
Note: If the limiter is moved too far, it may cause malfunction or leakage. Make sure that the gap between the glass panel and the roof panel is no more than 0.3 mm.
Fig. 8.32. Adjustment nuts
Measure the driving force of the electric motor and adjust its value to 15–25 kg using the torque adjustment nut on the electric motor (Fig. 8.32).
After adjustment, make sure to secure the nut with a lock washer.