Front Stop Bracket Bolt (10 x 25mm & 12 x 30mm) - 33-50 & 65-85
Rear Stop Bracket Bolt (10 x 25mm) - 33-50
Crankshaft bolt - 150-160
Timing Belt Tensioner - 22-30
Camshaft Pulley Bolt - 80-100
Valve Cover Bolts - 8-10
Main bearing cap bolts - 75-85
Connecting rod lower head cap nuts - 50-53
Cylinder head bolts
- Cold engine - 90-100
- Warm engine - 100-110
Crankcase drain plug - 35-45
Crankcase bolts - 5-7
Oil receiver bolt - 15-22
Oil filter bracket bolt - 12-15
Oil pump cover bolts - 12-15
Pressure reducing valve plug - 40-50
Oil pressure sensor - 8-12
Oil pump cover screw - 8-12
Oil filter - 17-25
Adapter and drive plate bolts - 73-77
Fastening the distributor adapter sleeve to the engine — 12-15
Rocker arm and shaft assembly bolt - 19-21
Air Filter Housing Mounting Bolt - 8-10
Receiver support - 12-15
Fastening the air receiver to the intake manifold (bolt) - 15-20
Fastening the air supply receiver to the intake manifold (nut) — 15-20
Fastening the intake manifold to the engine - 15-20
Fastening the exhaust manifold to the engine - 15-22
Oil dipstick guide to engine - 12-15
Engine Coolant Outlet Bolt - 17-20
Power Steering Pump Bracket - 17-26
Mounting the power steering pump to the bracket - 17-26
Fastening the inlet pipe to the exhaust manifold - 30-40
Engine Damper Nut (Large) - 90-110
Engine damper nut (small) - 30-40
Engine Bracket Nut - 60-80
Front stop nut - 50-65
Fastening the front stop bracket to the crossmember (bolt) - 40-50
Fastening the damper to the engine (bolt) - 30-40
Fastening the damper to the crossbar (nut) — 40-50
Rear stop nut - 45-60
Fastening the rear stop bracket to the crossmember (bolt) - 40-50
Transmission damper nut - 90-110
Fastening the gearbox bracket to the body (bolt) - 40-50
Fastening the gearbox bracket to the gearbox - 60-80
Gearbox support to engine mounting bolt - 65-85
Fastening the starter to the engine - 27-34
Fastening the belt cover to the engine - 8-10
Fuel Hose Clamp Fastener - 12-15
Gearbox support plate - 10-12
Back plate - 8-10
Oil seal housing - 10-12
Fastening the generator pulley bracket to the engine - 33-50
Generator pulley nut - 39-60
Crankshaft pulley - 150-160
Timing Belt Cover - 10-12
Attaching the hook to the engine - 20-27