Pic. 2.345. Air filter components
Withdrawal
Disconnect the intake duct from the air filter and resonator.
Disconnect the air flow sensor connector.
Remove the three bolts securing the air filter housing.
Pic. 2.346. Air filter housing
Remove the air filter housing (pic. 2.346).
Remove the air flow sensor from the intake duct.
Attention! Do not carry or hang the sensor by wires.
Examination
Check the air filter housing, cover and filter element for deformation, corrosion or damage.
Check the intake duct for damage.
Pic. 2.347. Air filter purge
Check the filter element for clogging, contamination or damage. If the filter element is slightly dirty or clogged, remove dust and other contaminants by blowing it with compressed air from the outside (on the side facing the intake manifold) (pic. 2.347).
Installation
Install the air filter in the reverse order of removal.