Gear ratios:
- first stage - 3,083
- second - 1,947
- third - 1.285
- fourth - 0.939
- fifth - 0.756
- reverse - 3,083
Final drive ratio - 4.592
Gear ratio of the speedometer drive - 32/36
Axial runout of the input shaft bearing - 0.01-0.12 mm
Axial runout of the front bearing of the intermediate shaft - 0.01-0.11 mm
Axial runout of the rear bearing of the intermediate shaft - 0.05-0.10 mm
Axial runout of the output shaft bearing - 0.05-0.10 mm
The limit value of the gap between the synchronizer ring and the gear is 0.5 mm