Fig. 3.35. Rubber bushing installation diagram
Install the rubber bushing so that the cable and the protruding part of the bushing are horizontal, as shown in Figure 3.35.
Caution! The speedometer drive cable must be routed so that the cable bend radius is 150 mm or greater.
Fig. 3.36. Installing the speedometer drive cable end
From the gearbox side, it is necessary to insert the end of the speedometer drive cable into the gearbox and securely tighten the fastening nut (Fig. 3.36).
[Original version of the article on the website HYUNDAIBOOK]
Caution: If the speedometer drive cable is not connected correctly or securely, the speedometer reading will be incorrect and abnormal noise will occur.